Product Brief:

The main advantage of XTB series air suspension bearing high speed centrifugal blower is that it saves energy.The product of the mouth adopts

air suspension bearing, combined with precision casting impeller, super high speed and high efficiency motor,a high efficiency, energy-saving and environment-friendly high speed centrifugal blower made by international famous inverter technology.

Product Components:

Comparing With Other Bearings:

Advantages of XTB Blower

(1) Energy-saving, high efficiency
Air bearing turbo centrifugal blower adopts air foil bearings, direct-connection technology, high efficiency impeller and motor. No additional friction will occur, and motor power consumption is automatically adjusted according to the output airflow capacity (adjustable range 20-100%), so the energy-saving effect is remarkable.

(2) Low noise
Adopt air bearing and direct-connection way without mechanical contact. Noise is lower than 80dB- @ 1.5m, so there’s no need to install acoustic enclosure.

(3) No oil, no vibration
Air quality reaches ISO 8573-1 0 grade without vibration, so anti-vibration work is not required.

(4) Convenient maintenance
Without gearbox and oil-lubricated bearing of traditional blowers, high and new technology is introduced for convenient maintenance


5.Model and Datas

Company Introduction

B-Tohin Machine(Jiangsu)Co;Ltd.,a joint venture,was established in 1994 and located in Yixing Environmental Protection Science and Technology Industrial Park,National High Tech Development Zone,China.It is mainly engaged in the production and sales of 3-robe roots blowers,rotary blowers,screw blowers,air suspension centrifugal blower,magnetic centrifugal blower,gear speed single-stage high-speed centrifugal blower,multi-stage centrifugal blower,fiberglass blowers,stainless steel blowers,vacuum pumps,water pumps and other products.The products are widely used in environmental protection water treatment,building materials cement,chemical industry,electric power petroleum,steel,metallurgy,mining,printing and dyeing, grain transportation ,new energy and new materials and other industries.The products are sold all over the country,and exported to many countries and regions.At present,the company has established an annual production and sales scale of over 30000 units(sets) of various type of blowers and pumps.

The company has successfully passed the certification of ISO9001 quality management system certification,ISO 14001 environmental management system certification,ISO 45001 occupation health and safety management system certification and ISO50001 energy management system certification.The company also has been certified as “High &New-tech Enterprises of Jiangsu Province” for many years.B-Tohin Tech R&D Center has a team of professor level senior engineers,doctoral and master’s students ,and a group of undergraduate students for scientific and technological innovation.It has established the“Jiangsu Province Energy saving Aerodynamic Equipment Engineering Technology Research Center ”and “Air Suspension Bearing Research and production Center” .At the same time,it has also obtained the national standard GB/T2.79.22-2011“Product After sales Service Evaluation System”five-star certification,“JiangSu Province Specialized,Refine,Unique and New Small and Medium sized Enterprises”,Mayor’s Quality Management Excellence Award”,“Carbon Management System Certificate”,“AA level Integration Management System Evaluation Certificate”,and“Enterprise in Compliance with Environmental Protection Equipment Manufacturing Industry Standard.”

As a member unit of the National Blower Standardization Technical Committee,participating in the formulation and revision of multiple wind turbine industry standards,and serving as the main drafting unit. The main products have also passed CE certification for export to the European Union,as well as multiple international certifications such as GOST and BV.

Main Products:

B-Tohin Machine (Jiangsu) Co., Ltd. is a foreign invested enterprise established in 1994. It is located at Yixing Industrial Park for Environmental Science & Technology, one of State High-Technology Development Zones. With total registered capital of RMB 120 million and total investment of RMB 160 million B-Tohin is engaged in production and sales of HC blower, BK and YU Roots blowers,air compressor blower,screw blower, anti-corrosion and anti-explosion stainless steel Roots blowers, gear speed-up centrifugal blower, multi-stage centrifugal blowers and in the sales of other supporting products for water treatment in environmental protection, such as water pump (YU, WQ submersible pump, YYOW split case pump), mixer, dewatering machine, etc. By the purchase of a new building of 26000 m2 area in Yixing Economic Development Zone in 2015, the expansion of production scale is supported.

B-Tohin’s products have been widely used in various industries, including water treatment, construction material and cement manufacture, chemical industry, electricity, petroleum, steel, metallurgy, mine, food convey lines, etc., enjoying a good reputation among customers both in the overseas and domestic market.

In the company’s Research and Development Center, a technical innovation team composed of professor level Senior Engineers, Doctors, Masters and many undergraduates, is aiming at the service for environmental protection by tracing and developing the products of high level.

B-Tohin has made great investment in introducing CNC, full-automatic digital control lathes, CMM and other advanced equipment to ensure good quality. A complete set of advanced horizontal OKUMA CNC was introduced specially for the fine finish machining of blower cylinders and end-covers; a NC machine was imported for the processing of blower parts; a Taiwan Dahlih-made CNC was equipped for machining the parts of middle and large size blowers; and several back-forth curve machining planers were introduced for solving the problem of shapers’ precision problem. This kind of planer ranks among the advanced level in China which is specially designed for curve machining of blower rotors. In the beginning of 2015, we cooperated with Testing Laboratory of Shenyang Blower Research Institute (Quality Supervision & Inspection Center for Blowers of China Machinery Industry), and a whole set of blower performance test system was designed for us according to the Roots Blower Industry Standard by the Laboratory.

Passed the certification of ISO9001 & ISO 14001:2400, the company has been nominated as “High & New-tech Enterprises of Jiangsu Province” and “Pneumatic Technology Research Center of Jiangsu Province”. In successive seven years, B-Tohin has been honored as “Favorite Brand of Users in Water Treatment Industry” and “Main Enterprise in Chinese Roots Blower Industry” in 2014, it has been awarded the title of “2014 Top 10 Brands in Chinese Water Industry” on website.

Being a member of National Commission for Pneumatic Conveying and National Technical Committee of Standardization of Blower, and one of the sponsors of National Union of Environmental Protection Equipment Brands, B-Tohin Machine has been an excellent and famous enterprise in environmental protection blower industry.

B-Tohin’s tenet of “Eternal pursuit of improving, eternal promise of satisfying customers” and spirit of “Together with Heat” are always kept in every employee’s mind and in every step of company management. All the honors belong to the past only, people of B-Tohin will make every endeavor to design and manufacture more perfect products for contributing more to the related industries both at home and abroad and to our domestic machinery industry.